2.1. FCC: Getting started with event generation
2.1.1. Overview
2.1.2. Enabling FCCSW
The FCC software FCCSW is fully embedded in the key4hep software stack or ecosystem, which means that the components providing the framework and those FCC specific are all available in key4hep. To configure your environment for the FCC software is therefore sufficient to initialise key4hep:
source /cvmfs/sw.hsf.org/key4hep/setup.sh
Nota Bene
For legacy reasons the following is still provided, fully equivalent to the above
source /cvmfs/fcc.cern.ch/sw/latest/setup.sh
Note however that not all the cvmfs tier-1 centers replicate the fcc.cern.ch, so this may lead to slowdowns or even failures.
Builds exist on CernVM-FS for CentOS7 (this is the Operating System run on lxplus) using as compiler Gcc 11 (currently gcc version 11.2.0).
Nota Bene
The combination of old glibc version available on CentOS7 with the backward compatibility attributes of glibc makes the provided stack in principle working for newer OSes, such as CentOS8, AlmaLinux9 or Fedora37. This in general holds, though less core aspects, such graphics, might still be OS specific.
The gaudimain steering application here is called k4run which should be available at this point:
$ which k4run
/cvmfs/sw.hsf.org/spackages7/k4fwcore/1.0pre16/x86_64-centos7-gcc11.2.0-opt/tp4u6/bin/k4run
(The output might differ, but shouldn’t be empty and the structure should be similar).
The application fccrun is still provided, fully equivalent to k4run.
Nota Bene
You will need to source the /cvmfs/sw.hsf.org/key4hep/setup.sh script everytime you want to use the software.
2.1.3. Generators
2.1.3.1. Overview
The physics generators available for FCC usually come from key4hep. However, any generator
able to generate events in one of the understood formats, e.g. HepMC or EDM4hep or LHEf, can be used in standalone.
Following the discussion at the 1st ECFA workshop on Generators, the recommended formats are HepMC3 and EDM4hep; LHEf is still much in use though.
This pages intend to illustrate the use of a few general purpose generators available when enabling FCCSW:
pythia8, whizard, MadGraph5, Herwig, KKMCee, BHLUMI, BabaYaga.
2.1.3.2. Pythia8
Pythia8 is fully intergrated in Key4hep software stack and it provides diverse functionality in addition to event generation, including capability to read events in LHEf format.
To use Pythia8 we need a Gaudi steering file and a Pythia8 configuration file, usually having extension .cmd. Examples of these .cmd files are available from the FCC-config repository.
The Gaudi steering file needs to activate the GaudiTool that interfaces Pythia8, available from the k4Gen repository under the name PythiaInterface.
An example of steering file can be found at pythia.py. The steering file runs the minimal set of algorithms to run Pythia8 and produce an output in EDM4hep format:
$ wget https://raw.githubusercontent.com/HEP-FCC/k4Gen/main/k4Gen/options/pythia.py
$ k4run --dry-run pythia.py
--> Pythia8 --> HepMCToEDMConverter --> StableParticles --> out
[...]
For example, to generate 500 e+e- → mu+mu- at 91.2 GeV, we can do the following: download the configuration file:
$ wget https://raw.githubusercontent.com/HEP-FCC/FCC-config/main/FCCee/Generator/Pythia8/p8_ee_Zmumu_ecm91.cmd
and run
k4run pythia.py -n 500 --out.filename p8_mumu_500.e4h.root --Pythia8.PythiaInterface.pythiacard p8_ee_Zmumu_ecm91.cmd
2.1.3.3. Whizard
Whizard is available as standalone program:
$ which whizard
/cvmfs/sw.hsf.org/spackages6/whizard/3.0.3/x86_64-centos7-gcc11.2.0-opt/yy7yk/bin/whizard
Whizard is run as this:
whizard <process_config>.sin
Example of Sindarin configuration files are found under
ls /cvmfs/sw.hsf.org/spackages6/whizard/3.0.3/x86_64-centos7-gcc11.2.0-opt/yy7yk/share/whizard/examples/
or at https://gitlab.tp.nt.uni-siegen.de/whizard/public/-/tree/master/share/examples.
Some examples more specific to FCC can be found at https://fccsw.web.cern.ch/fccsw/share/gen/whizard/Zpole/`.
Show dimuon example
It is advised to work in a separate directory for each process. For example, for Z_mumu, we have:
mkdir -p test_whizard/Z_mumu; cd test_whizard/Z_mumu
wget https://fccsw.web.cern.ch/fccsw/share/gen/whizard/Zpole/Z_mumu.sin
whizard Z_mumu.sin
| Writing log to 'whizard.log'
|=============================================================================|
| |
| WW WW WW WW WW WWWWWW WW WWWWW WWWW |
| WW WW WW WW WW WW WW WWWW WW WW WW WW |
| WW WW WW WW WWWWWWW WW WW WW WW WWWWW WW WW |
| WWWW WWWW WW WW WW WW WWWWWWWW WW WW WW WW |
| WW WW WW WW WW WWWWWW WW WW WW WW WWWW |
| |
| |
...
|=============================================================================|
| WHIZARD 3.0.1
|=============================================================================|
| Reading model file '/cvmfs/sw.hsf.org/spackages6/whizard/3.0.1/x86_64-centos7-gcc11.2.0-opt/pmm4s/share/whizard/models/SM.mdl'
| Preloaded model: SM
| Process library 'default_lib': initialized
| Preloaded library: default_lib
| Reading model file '/cvmfs/sw.hsf.org/spackages6/whizard/3.0.1/x86_64-centos7-gcc11.2.0-opt/pmm4s/share/whizard/models/SM_hadrons.mdl'
| Reading commands from file 'Z_mumu.sin'
| Switching to model 'SM', scheme 'default'
...
$description = "A WHIZARD 3.0 Example.
Z -> mumu @ 91.2 events for FCC ee."
$y_label = "$N_{\textrm{events}}$"
$sample = "z_mumu"
| Starting simulation for process 'zmumu'
| Simulate: using integration grids from file 'zmumu.m1.vg'
| RNG: Initializing TAO random-number generator
| RNG: Setting seed for random-number generator to 22345
| Simulation: requested number of events = 1000
| corr. to luminosity [fb-1] = 6.6285E-04
| Events: writing to HepMC file 'z_mumu.hepmc'
| Events: writing to raw file 'z_mumu.evx'
| Events: generating 1000 unweighted, unpolarized events ...
| Events: event normalization mode '1'
| ... event sample complete.
| Events: actual unweighting efficiency = 1.16 %
Warning: Encountered events with excess weight: 6 events ( 0.600 %)
| Maximum excess weight = 2.465E+00
| Average excess weight = 4.511E-03
| Events: closing HepMC file 'z_mumu.hepmc'
| Events: closing raw file 'z_mumu.evx'
| There were no errors and 2 warning(s).
| WHIZARD run finished.
|=============================================================================|
The file z_mumu.hepmc contains 100 e+e- → mu+mu-(gamma) events in HepMC 3 format .
2.1.3.4. KKMCee
KKMCee is an adaptation of the KKMC Monte Carlo generator (the latest version of the Koral generators) to the
case of FCC-ee.
KKMCee is available as standalone program when using the key4hep stack:
which KKMCee
/cvmfs/sw.hsf.org/spackages6/kkmcee/5.00.02/x86_64-centos7-gcc11.2.0-opt/eodg6/bin/KKMCee
A help function is available:
KKMCee -h
Show help function output
+++ Wrapper around the KKMCee executable +++
Usage: \tKKMCee -f Mu|Tau|UDS|C|B|Hadrons -e Ecms -n Nevts -o output_file [-s initial_seed] [OPTIONS]
\tKKMCee -c config_file [-s initial_seed]
Options:
-c, --config file Path to configuration file
-f, --flavour flavour Flavour to be generated (Mu|Tau|UDS|C|B|Hadrons)
-e, --ecms energy Center of Mass energy in GeV
-n, --nevts events Number of events to be generated
-o, --outfile file File with the generated events in HEPMCv3 format [kkmcee.hepmc]
-s, --initialseed Long number to be used for initial seeding (randomly generated, if missing)
-b, --bessig bessig Beam-Energy-Spread of both beams (or of the first beam, if bessig2<0.)
[fraction of Ecms/2, default -1. (no spread)]
-g, --bessig2 bessig2 Beam-Energy-Spread of the second beam if different from the first beam; fraction of Ecms/2.
[fraction of Ecms/2, default -1. (no spread or equal to first beam)]
-r, --besrho rho Beam-Energy-Spread correlation [default 0.]
-d, --debug lvl PrintOut Level 0,1,2 [default 1]
Special options for taus only:
-t, --taudec t1*1000+t2 decay channel for the first (t1) and second tau (t2)
0 Inclusive
1,2,3 electron,mu,pi
4,5,6,7 rho,a1,K,K*
8,9,10,11,12,13 3pip0,pi3pi0,3pi2pi0,5pi,5pip0,3pi3p0
14, ... (other rare decays see tauola++)
--tauopt file File with tau options (see Tauola section in KKMCee_defaults)
the file is included as it is and overwrites other settings
Examples:
KKMCee -f Mu -e 91.2 -n 10000 -o kkmu_10000.hepmc -b 0.001
KKMCee -c kkmc_ditau.input
KKMCee -f B -e 91.2 -n 1000 -o kkbb_1000.hepmc
NB: (1) This wrapper works only for KKMCee versions 5 or newer
(2) Output is HEPMC v3
Nota Bene
Note that, due to a mangling issue internal to KKMCee, the channel numbering for decays channel with pions is not the one shown by the help function. The numbering follows the relative order found in the file pro77.output produced by a KKMMee run. In particular, the single pion channel is numbered 159.
A next version will address this issue.
Show channel numbering
Most common decays
# Default BR Channel
1 0.17865208 TAU- --> E-
2 0.17355204 TAU- --> MU-
159 0.11084167 TAU- --> PI-
88 0.25375551 TAU- --> RHO- -> PI- PI0
77 0.91783553E-01 TAU- --> PI0 PI0 PI-
4 0.12619076E-01 TAU- --> 3PI0, PI-
78 0.91783553E-01 TAU- --> PI- PI- PI+
3 0.43654263E-01 TAU- --> 2PI-, PI+, PI0
35 0.50110305E-02 TAU- --> 2PI-, PI+, 2PI0 old
56 0.78900479E-03 TAU- --> 3PI-, 2PI+,
57 0.18300110E-03 TAU- --> 3PI-, 2PI+, PI0
58 0.25100150E-03 TAU- --> 2PI-, PI+, 3PI0
All decays
# Default BR Channel
1 0.17865208 TAU- --> E-
2 0.17355204 TAU- --> MU-
3 0.43654263E-01 TAU- --> 2PI-, PI+, PI0
4 0.12619076E-01 TAU- --> 3PI0, PI-
5 0.0000000 TAU- --> nu_e e- e- e+
6 0.0000000 TAU- --> nu_mu mu- mu- mu+
7 0.0000000 TAU- --> nu_e e- mu- mu+
8 0.0000000 TAU- --> nu_mu mu- e- e+
9 0.0000000 TAU- --> K- 3PI0
10 0.0000000 TAU- --> 2PI0 ETA K-
11 0.0000000 TAU- --> 2PI0 K0 PI-
12 0.0000000 TAU- --> PI0 K0 ETA PI-
13 0.0000000 TAU- --> PI0 PI- PI+ K-
14 0.0000000 TAU- --> K0 PI- PI+ PI-
15 0.0000000 TAU- --> 2PI0 ETA PI-
16 0.0000000 TAU- --> K0 K0B ETA PI-
17 0.0000000 TAU- --> K0 K0B PI0 PI-
18 0.0000000 TAU- --> K0 K0B K0 PI-
19 0.0000000 TAU- --> K0 PI0 PI0 K-
20 0.0000000 TAU- --> K0 K0B PI0 K-
21 0.0000000 TAU- --> PI0 K0 ETA K-
22 0.0000000 TAU- --> PI-PI+PI- ETA
23 0.0000000 TAU- --> PI-K+ K- PI0
24 0.0000000 TAU- --> K- K+ K- PI0
25 0.0000000 TAU- --> K- K+ K- K0
26 0.0000000 TAU- --> K- PI+PI- K0
27 0.0000000 TAU- --> K- K+ PI- K0
28 0.0000000 TAU- --> PI-PI+PI- OMEGA
29 0.0000000 reserved
30 0.0000000 reserved
31 0.0000000 reserved
32 0.0000000 reserved
33 0.0000000 reserved
34 0.0000000 reserved
35 0.50110305E-02 TAU- --> 2PI-, PI+, 2PI0 old
36 0.0000000 TAU- --> a1 --> rho omega
37 0.0000000 TAU- --> benchmark curr
38 0.0000000 TAU- --> 2PI- PI+ 2PI0 app08
39 0.0000000 TAU- --> PI- 4PI0 app08
40 0.0000000 TAU- --> 3PI- 2PI+ app08
41 0.0000000 TAU- --> 2PI- 2PI+ K-
42 0.0000000 TAU- --> 2PI- PI+ PI0 K0
43 0.0000000 TAU- --> PI- 4PI0
44 0.0000000 reserved
45 0.0000000 reserved
46 0.0000000 reserved
47 0.0000000 reserved
48 0.0000000 reserved
49 0.0000000 reserved
50 0.0000000 reserved
51 0.0000000 reserved
52 0.0000000 reserved
53 0.0000000 reserved
54 0.0000000 reserved
55 0.0000000 reserved
56 0.78900479E-03 TAU- --> 3PI-, 2PI+,
57 0.18300110E-03 TAU- --> 3PI-, 2PI+, PI0
58 0.25100150E-03 TAU- --> 2PI-, PI+, 3PI0
59 0.0000000 TAU- --> 3pi- 2pi+ 2pi0
60 0.0000000 TAU- --> 4PI- 3PI+
61 0.0000000 TAU- --> 4PI- 3PI+ PI0
62 0.0000000 TAU- --> 2PI- 2PI+ K- PI0
63 0.0000000 reserved
64 0.0000000 reserved
65 0.0000000 reserved
66 0.0000000 reserved
67 0.0000000 reserved
68 0.0000000 reserved
69 0.15900095E-02 TAU- --> K-, PI-, K+
70 0.16720101E-02 TAU- --> K0, PI-, K0B
71 0.15360093E-02 TAU- --> K-, PI0, K0
72 0.68000407E-03 TAU- --> PI0 PI0 K-
73 0.30090183E-02 TAU- --> K- PI- PI+
74 0.37670226E-02 TAU- --> PI- K0B PI0
75 0.18300110E-02 TAU- --> ETA PI- PI0
76 0.80200483E-03 TAU- --> PI- PI0 GAM
77 0.91783553E-01 TAU- --> PI0 PI0 PI-
78 0.91783553E-01 TAU- --> PI- PI- PI+
79 0.0000000 TAU- --> K- K- K+
80 0.0000000 TAU- --> K- K0 K0
81 0.0000000 TAU- --> K- ETA PI0
82 0.0000000 TAU- --> K0 ETA PI-
83 0.0000000 TAU- --> K- K0 RHO0
84 0.0000000 TAU- --> PI- PHI PI0
85 0.0000000 TAU- --> K- PHI PI0
86 0.0000000 TAU- --> K0 ETA K-
87 0.0000000 reserved
88 0.25375551 TAU- --> RHO- -> PI- PI0
89 0.90931449E-02 TAU- --> PI- K0
90 0.45479368E-02 TAU- --> K- PI0
91 0.16510099E-02 TAU- --> K- K0
92 0.0000000 TAU- --> mu-mu-mu+ !nu_tau
93 0.0000000 TAU- --> mu- mu- e+ !nu_tau
94 0.0000000 TAU- --> mu- e- mu+ !nu_tau
95 0.0000000 TAU- --> mu- e- e+ !nu_tau
96 0.0000000 TAU- --> mu+ e- e- !nu_tau
97 0.0000000 TAU- --> e- e- e+ !nu_tau
98 0.0000000 TAU- --> e-pi+pi- !nu_tau
99 0.0000000 TAU- --> mu-pi+pi- !nu_tau
100 0.0000000 TAU- --> e-pi+K- !nu_tau
101 0.0000000 TAU- --> mu-pi+K- !nu_tau
102 0.0000000 TAU- --> e-pi-K+ !nu_tau
103 0.0000000 TAU- --> mu-pi-K+ !nu_tau
104 0.0000000 TAU- --> e-K-K+ !nu_tau
105 0.0000000 TAU- --> mu-K-K+ !nu_tau
106 0.0000000 TAU- --> e-K0K0 !nu_tau
107 0.0000000 TAU- --> mu-K0K0 !nu_tau
108 0.0000000 TAU- --> e+pi-pi- !nu_tau
109 0.0000000 TAU- --> mu+pi-pi- !nu_tau
110 0.0000000 TAU- --> e+pi-K- !nu_tau
111 0.0000000 TAU- --> mu+pi-K- !nu_tau
112 0.0000000 TAU- --> e+K-K- !nu_tau
113 0.0000000 TAU- --> mu+K-K- !nu_tau
114 0.0000000 TAU- --> mu-mu- p+ !nu_tau
115 0.0000000 TAU- --> mu-mu+ p- !nu_tau
116 0.0000000 TAU- --> e - e- p+ !nu_tau
117 0.0000000 TAU- --> e - e+ p- !nu_tau
118 0.0000000 TAU- --> eta k-
119 0.0000000 TAU- --> eta pi-
120 0.0000000 TAU- --> PI- PHI
121 0.0000000 TAU- --> K- PHI
122 0.0000000 TAU- --> PI- OMEGA
123 0.0000000 TAU- --> K- OMEGA
124 0.0000000 TAU- --> PI- ETAprm
125 0.0000000 TAU- --> K- ETAprm
126 0.0000000 TAU- --> e- mu+ p- !nu_tau
127 0.0000000 TAU- --> e+ mu- p- !nu_tau
128 0.0000000 TAU- --> e- mu- p+ !nu_tau
129 0.0000000 TAU- --> e- PI0 PI0 !nu_tau
130 0.0000000 TAU- --> mu- PI0 PI0 !nu_tau
131 0.0000000 TAU- --> e- PI0 eta !nu_tau
132 0.0000000 TAU- --> mu- PI0 eta !nu_tau
133 0.0000000 TAU- --> e- PI0 eta_p !nu_t
134 0.0000000 TAU- --> mu- PI0 eta_p !nu_t
135 0.0000000 TAU- --> e- eta eta !nu_tau
136 0.0000000 TAU- --> mu- eta eta !nu_tau
137 0.0000000 TAU- --> e- eta eta_p !nu_t
138 0.0000000 TAU- --> mu- eta eta_p !nu_t
139 0.0000000 TAU- --> e- PI0 Ks !nu_tau
140 0.0000000 TAU- --> mu- PI0 Ks !nu_tau
141 0.0000000 TAU- --> e- eta Ks !nu_tau
142 0.0000000 TAU- --> mu- eta Ks !nu_tau
143 0.0000000 TAU- --> e- eta_p Ks !nu_tau
144 0.0000000 TAU- --> mu- eta_p Ks !nu_t
145 0.0000000 TAU- --> p- pi+ K- !nu_tau
146 0.0000000 TAU- --> p+ pi- K- !nu_tau
147 0.0000000 TAU- --> p- K+ pi- !nu_tau
148 0.0000000 TAU- --> p- pi0 pi0 !nu_tau
149 0.0000000 TAU- --> p- pi0 eta !nu_tau
150 0.0000000 TAU- --> p- pi0 Ks !nu_tau
151 0.0000000 reserved
152 0.0000000 reserved
153 0.0000000 reserved
154 0.0000000 reserved
155 0.0000000 reserved
156 0.0000000 reserved
157 0.0000000 reserved
158 0.0000000 reserved
159 0.11084167 TAU- --> PI-
160 0.69460417E-02 TAU- --> K-
161 0.0000000 TAU- --> gamma e- !nu_tau
162 0.0000000 TAU- --> gamma mu- !nu_tau
163 0.0000000 TAU- --> PI0 e- !nu_tau
164 0.0000000 TAU- --> PI0 mu- !nu_tau
165 0.0000000 TAU- --> eta e- !nu_tau
166 0.0000000 TAU- --> eta mu- !nu_tau
167 0.0000000 TAU- --> e- K0 !nu_tau
168 0.0000000 TAU- --> mu- K0 !nu_tau
169 0.0000000 TAU- --> e- omega !nu_tau
170 0.0000000 TAU- --> mu- omega !nu_tau
171 0.0000000 TAU- --> e- phi !nu_tau
172 0.0000000 TAU- --> mu- phi !nu_tau
173 0.0000000 TAU- --> e- rho0 !nu_tau
174 0.0000000 TAU- --> mu- rho0 !nu_tau
175 0.0000000 TAU- --> A0-
176 0.0000000 TAU- --> B1-
177 0.0000000 TAU- --> e- K0 !nu_tau
178 0.0000000 TAU- --> mu- K0 !nu_tau
179 0.0000000 TAU- --> p gamma !nu_tau
180 0.0000000 TAU- --> p pi0 !nu_tau
181 0.0000000 TAU- --> p eta !nu_tau
182 0.0000000 TAU- --> p K0 !nu_tau
183 0.0000000 TAU- --> e- eta_p !nu_tau
184 0.0000000 TAU- --> mu- eta_p !nu_tau
185 0.0000000 TAU- --> pi- lambda !nu_tau
186 0.0000000 TAU- --> pi- lmb_br !nu_tau
187 0.0000000 TAU- --> K- lambda !nu_tau
188 0.0000000 TAU- --> K- lmb_bar !nu_tau
189 0.0000000 TAU- --> e- K* !nu_tau
190 0.0000000 TAU- --> e- K*_bar !nu_tau
191 0.0000000 TAU- --> mu- K*_bar !nu_tau
192 0.0000000 TAU- --> mu- K* !nu_tau
193 0.0000000 TAU- --> e- a0(980) !nu_tau
194 0.0000000 TAU- --> mu- a0(980) !nu_tau
195 0.0000000 TAU- --> e- f0(980) !nu_tau
196 0.0000000 TAU- --> mu- f0(980) !nu_tau
197 0.0000000 reserved
198 0.0000000 reserved
Note that the BES (Beam Energy Spread) options are only available in version 4.32.01 and higher.
A configuration example file for taus is available under at
ls `dirname $( which KKMCee )`/../share/KKMCee/kkmc-tauola.input
Show dimuon example
To generate a sample of dimuon events using the example files, do the following
KKMCee -f Mu -e 91.2 -n 1000 -o kkmu_1000.hepmc
The output should look something like this:
Seeds: 29318493 48191772
29318493 IJKLIN= 29318493 48191772
0 NTOTIN= 0
0 NTOT2N= 0
------- starting from the scratch ----------
ranmar initialized: ij,kl,ijkl,ntot,ntot2= 974 18625 29318493 0 0
1000 requested events
---------------
****************************
* KK2f_ReaDataX Starts *
****************************
---------------
---------------
---------------
---------------
---------------
BeginX
********************************************************************************
* ACTUAL DATA FOR THIS PARTICULAR RUN
********************************************************************************
*indx_____data______ccccccccc0ccccccccc0ccccccccc0ccccccccc0ccccccccc0ccccccccc0
* Center-of-mass energy [GeV]
1 91.0000 CMSene =xpar( 1) Average Center of mass energy [GeV]
********************************************************************************
* Define process
413 1.00000 KFfin, muon
100 1.00000 store lhe file to (LHE_OUT.LHE)
--------------- 26 36 LHE_OUT.LHE
************************* one can change the lhf file name between brackets
********************************************************************************
EndX
**************************
* KK2f_ReaDataX Ends *
**************************
Tables are READ from DiskFile dizet/table.down
amz,amh,amtop,swsq,gammz,amw,gammw=
= 91.1876000 125.1000000 173.0000000 0.2234020 2.4953766 80.3588894 2.0898788
...
Event listing (summary)
I particle/jet KS KF orig p_x p_y p_z E m
1 !e-! 21 11 0 0.000 0.000 45.500 45.500 0.001
2 !e+! 21 -11 0 0.000 0.000 -45.500 45.500 0.001
3 (Z0) 11 23 1 0.039 0.001 0.115 90.879 90.879
4 gamma 1 22 1 0.000 0.000 -0.001 0.001 0.000
5 gamma 1 22 1 -0.039 -0.001 -0.114 0.120 0.000
6 mu- 1 13 3 14.678 0.229 43.067 45.500 0.106
7 mu+ 1 -13 3 -14.639 -0.229 -42.952 45.379 0.106
sum: 0.00 0.000 0.000 0.000 91.000 91.000
iev= 501
generation finished
xSecPb, xErrPb = 1442.5021729176829 13.903134156944603
++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ GLK_PRINT: bmin.eq.bmax, id= 50004 ++
++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ GLK_PRINT: bmin.eq.bmax, id= 50005 ++
++++++++++++++++++++++++++++++++++++++++++++++++++++++
real 0m4.043s
user 0m3.777s
sys 0m0.085s
and a file kkmu_1000.hepmc created.
KKMCee creates several files during its run. These are saved into a folder called KKMCee-<date>-<time>, for example KKMCee-12Oct2022-191047.
This folder contains the files:
$ ls KKMCee-12Oct2022-191047
DIZET-table1 TabMain77.output TabMainC.output mcgen.root pro.input pro.output pro77.output
The file pro.input contains the configuration options and can be used to repeat the run
KKMCee -c KKMCee-12Oct2022-191047/pro.input
and, of course, as base configuration file example for further variations.
2.1.3.5. BHLUMI
BHLUMI is a Monte Carlo generator of Bhabha events used at LEP for luminosity studies.
BHLUMI is available as standalone program when using the key4hep stack:
which BHLUMI
/cvmfs/sw.hsf.org/spackages4/bhlumi/4.04-linuxLHE/x86_64-centos7-gcc8.3.0-opt/o7rmcus/bin/BHLUMI
A help function is available:
BHLUMI -h
Show help function output
+++ Wrapper around the BHLUMI.exe executable +++
Usage: BHLUMI -e Ecms -n Nevts -f Thmin -t Thmax -x epscms -o output_file [-s seed_file]
BHLUMI -c config_file [-s seed_file]
Switches:
-c, --config file Path to configuration file
-e, --ecms energy Center of Mass energy in GeV
-n, --nevts energy Number of events to be generated
-f, --Thmin theta Minimum theta [rad]
-t, --Thmax theta Maximum theta [rad]
-x, --epscms fraction Energy cut-off in fraction of Ecms
-o, --outfile file File with the generated events in LHE format
-s, --seedfile file File to be used for seeding (randomly generated, if missing)
Examples:
BHLUMI -f 0.022 -t 0.082 -x 0.001 -e 91.2 -n 10000 -o kkmu_10000.LHE
BHLUMI -c bhlumi.input
Additional switches (for experts only):
-k, --keyopt KEYOPT Technical parameters switch [default 3021]
KEYOPT = 1000*KEYGEN + 100*KEYREM + 10*KEYWGT + KEYRND
-r, --keyrad KEYRAD Physics parameters switch [default 1021]
KEYRAD = 1000*KEYZET + 100*KEYUPD + 10*KEYMOD + KEYPIA
(Contact BHLUMI authors for details, e.g. through https://github.com/KrakowHEPSoft/BHLUMI)
2.1.3.6. BabaYaga
BabaYaga is a Monte Carlo generator of two-photons events used at LEP.
BabaYaga is available as standalone program when using the key4hep stack:
which babayaga
/cvmfs/sw.hsf.org/spackages4/babayaga/fcc-1.0.0/x86_64-centos7-gcc8.3.0-opt/jsgdir7/bin/babayaga
A help function is available:
babayaga -h
Show help function output
+++ Wrapper around the babayaga-fcc.exe executable +++
+++ Process: e+e- -> gamma gamma
Usage: babayaga -e Ecms -n Nevts -f Thmin -t Thmax -x epscms -o output_file [-s seed]
babayaga -c config_file [-s seed]
Switches:
-c, --config file Path to configuration file
-e, --ecms energy Center of Mass energy in GeV
-n, --nevts energy Number of events to be generated
-f, --Thmin angle Minimum theta [deg]
-t, --Thmax angle Maximum theta [deg]
-a, --acolmax angle Max acollinearity [deg]
-m, --emin energy Min energy in GeV
-x, --eps fraction Soft-photon cut-off
-o, --outfile file File with the generated events in LHE format
-w, --outdir path Path with working space (and residual files)
-s, --seed number Number used for seeding (randomly generated, if missing)
-d, --debug number Debug level (0, 1, 2, ...)
Examples:
babayaga -f 15. -t 165. -e 91.2 -n 10000 -o bbyg_10000.LHE
babayaga -c babayaga.input -o bbyg.LHE
2.1.3.7. Herwig
Herwig is another historical LEP generator providing a difefrent approach to hadronization wrt Pythia8. It is available as standalone program:
$ which Herwig
/cvmfs/sw.hsf.org/spackages7/herwig3/7.2.3/x86_64-centos7-gcc11.2.0-opt/q3pxd/bin/Herwig
2.1.3.8. MadGraph5
MadGraph5 was developed for LHC but it is reality general purpose and can be used also for FCC-ee. It is available as standalone program:
$ which mg5_aMC
/cvmfs/sw.hsf.org/spackages7/madgraph5amc/2.8.1/x86_64-centos7-gcc11.2.0-opt/nlauf/bin/mg5_aMC
2.1.4. Hands-on case study: ditau events with Pythia8, Whizard and KKMCee
In this section we describe, with exercises, the generation of an equivalent sample of Monte Carlo events with three diffent generators: Pythia8, Whizard and KKMCee. The process chosen is \(e^{-}e^{+} \rightarrow \tau^{-}\tau^{+}\)
(hereafter referred to as ditaus), with both taus decaying leptonically with a muon in the final state. The centre of mass energy of 91.2 GeV. In the three cases 10000 will be generated and saved in ROOT files in EDM4hep format: the steps to arrive at this results are however different.
2.1.4.1. Generating ditaus with Pythia8
As explained in the dedicated Pythia8 section, we need a Pythia8 configuration file and a Gaudi configuration file.
For the former, to generate ditau events we will use the file
p8_ee_Ztautau_mumu_ecm91.cmd. We create a sub-directory cards and we retrieve in it the file:
$ mkdir cards; cd cards
$ wget https://raw.githubusercontent.com/HEP-FCC/FCC-config/main/FCCee/Generator/Pythia8/p8_ee_Ztautau_mumu_ecm91.cmd
For the second, we create a sub-directory config and we retrieve in it the pythia.py file:
$ mkdir config; cd config
$ wget https://raw.githubusercontent.com/HEP-FCC/k4Gen/main/k4Gen/options/pythia.py
Before running it, we also create sub-directories gen/<generator_tag>_tautau_ecm91 for the generator files in format edm4hep.
Nota Bene
The sub-directory structure here is not mandatory but copes with the dataset structure suggested by FCCAnalyses, as we can see later.
Now: how will we run it? (hint: check specific section)
Answer
k4run config/pythia.py -n 10000 --out.filename gen/p8_tautau_ecm91/events_1.root --Pythia8.PythiaInterface.pythiacard cards/p8_ee_Ztautau_mumu_ecm91.cmd
Running will take a few minutes. Among the last lines of the output there should be the total cross-section for the process:
*------- PYTHIA Event and Cross Section Statistics -------------------------------------------------------------*
| |
| Subprocess Code | Number of events | sigma +- delta |
| | Tried Selected Accepted | (estimated) (mb) |
| | | |
|-----------------------------------------------------------------------------------------------------------------|
| | | |
| f fbar -> gamma*/Z0 221 | 140682 10000 10000 | 1.458e-06 7.715e-09 |
| | | |
| sum | 140682 10000 10000 | 1.458e-06 7.715e-09 |
| |
*------- End PYTHIA Event and Cross Section Statistics ----------------------------------------------------------*
i.e. 1458.0 +- 7.7 pb.
2.1.4.2. Generating ditaus with Whizard
As explained in the dedicated Whizard section, to use whizard we need a Sindarin configuration file. To generate ditau events we will use the file
Z_tautau.sin:
$ wget http://fccsw.web.cern.ch/tutorials/apr2023/tutorial1/Z_tautau.sin
and run it in a dedicate directory to not pollute the working one with the many files produced:
$ mkdir -p whizard; cd whizard;
$ whizard ../Z_tautau.sin
The output created by whizard is LHEf (Les Houches Event format); this is because the current build does not support writing HepMC; this may change in the future.
Exercise: look at produced LHEf file z_tautau.lhe: what did we notice?
Answer
The taus are not decayed. We need another solution for that.
The first lines of the LHEf file give the total cross-section: 1.508 +- 2 pb, which seems definitely higher than the others.
2.1.4.2.1. LHEf to EDM4hep conversion
In order to get the events in EDM4hep format, we exploit the fact that Pythia provides LHEf reader functionality. To activate that we will use Gaudi and special .cmd file the consider the input LHEf input file as a Beam. This special .cmd is called p8_lhereader.cmd and it is available on the web:
S cd ../cards
wget http://fccsw.web.cern.ch/tutorials/apr2023/tutorial1/p8_lhereader.cmd
Please note the lines
! 4) Read-in Les Houches Event file - alternative beam and process selection.
Beams:frameType = 4 ! read info from a LHEF
Beams:LHEF = z_tautau.lhe ! the LHEF to read from
This file needs to be edited to enter the exact locaton of the input file (it could also be a symlink to avoid always editng the file.
Also note the lines:
! Tau decays to mu nu_tau nu_mu (from pythia8)
15:onMode = off
15:onIfAny = 14
which will make decay the taus in pythia8
As steering we will use the file pythia.py.
Q: how will we run it from the whizard sub-directory? (hint: think of the conversion file)
Answer
$ cd whizard
$ k4run ../config/pythia.py -n 10000 --out.filename ../gen/wz_tautau_ecm91/events_1.root --Pythia8.PythiaInterface.pythiacard ../cards/p8_lhereader.cmd | tee wz_ee_Ztautau_mumu_ecm91.log
2.1.4.3. Generating ditaus with KKMCee
As shown in the KKMCee section, event generation with the KKMCee is controlled through a configuration file. The interface available in key4hep allowed a generation of the configuration file through command line switches. Starting from the command line switches is therefore always a good option when no confguration file is available.
Currently, KKMCee does not have the option to save directly the events in EDM4hep format. In order to get there we need first to generate the events in HepMC format.
2.1.4.3.1. Generating HepMC events
What are the commands (options) to generate 10000 ditau events and saved them into the file gen/kk_ee_Ztautau_mumu_ecm91_10000.hepmc ?
Suggested answer
KKMCee -f Tau -e 91.2 -n 10000 -o kk_ee_Zautau_mumu_10000.hepmc -t 2002
Expand to see the example of the produced HepMC output
The HepMC output is an ASCII format and can browsed with for example more:
$ more kk_ee_Ztautau_mumu_10000.hepmc
HepMC::Version 3.02.05
HepMC::Asciiv3-START_EVENT_LISTING
E 0 5 13
U GEV MM
A 6 spin 0.008477 -0.585915 -0.810328
A 7 spin 0.895044 -0.441222 0.064956
P 1 0 -11 0.0000000000000000e+00 0.0000000000000000e+00 -4.5599999997136848e+01 4.5600000000000001e+01 5.1099859770630950e-04 4
P 2 1 -11 2.2399816427048513e-07 1.2760500083922739e-07 -4.5594392324226938e+01 4.5594392327084165e+01 5.1043808629749475e-04 2
P 3 1 22 -2.2399816427048513e-07 -1.2760500083922739e-07 -5.6076729099135154e-03 5.6076729158391651e-03 0.0000000000000000e+00 1
P 4 0 11 0.0000000000000000e+00 0.0000000000000000e+00 4.5599999997136848e+01 4.5600000000000001e+01 5.1099859770630950e-04 4
V -2 0 [2,4]
P 5 -2 23 2.2399816427048513e-07 1.2760500083922739e-07 5.6076729099103773e-03 9.1194392327084159e+01 9.1194392154672272e+01 2
P 6 5 15 7.1885962308218696e+00 -4.4991780056897120e+01 -9.8145772963693700e-02 4.5597189910708785e+01 1.7770500000001239e+00 2
P 7 5 -15 -7.1885960068237056e+00 4.4991780184502126e+01 1.0375344587360721e-01 4.5597202416375396e+01 1.7770499999998681e+00 2
P 8 6 16 3.6528532505035400e+00 -2.5398200988769531e+01 4.4600862264633179e-01 2.5663415908813477e+01 0.0000000000000000e+00 1
P 9 6 13 2.9088804721832275e+00 -1.4574359893798828e+01 -6.1780035495758057e-01 1.4875025749206543e+01 1.0565830000000000e-01 1
P 10 6 -14 6.2686276435852051e-01 -5.0192222595214844e+00 7.3646016418933868e-02 5.0587520599365234e+00 0.0000000000000000e+00 1
P 11 7 -16 -1.4101594686508179e+00 1.0276637077331543e+01 1.8954864144325256e-01 1.0374669075012207e+01 0.0000000000000000e+00 1
P 12 7 -13 -5.2335274219512939e-01 1.9895267486572266e+00 2.5705483555793762e-01 2.0758986473083496e+00 1.0565830000000000e-01 1
P 13 7 14 -5.2550840377807617e+00 3.2725616455078125e+01 -3.4285002946853638e-01 3.3146636962890625e+01 0.0000000000000000e+00 1
E 0 7 17
U GEV MM
A 8 spin -0.961817 0.224045 0.157199
A 9 spin -0.961817 0.224045 0.157199
A 11 spin -0.790568 -0.498846 -0.355182
P 1 0 -11 0.0000000000000000e+00 0.0000000000000000e+00 -4.5599999997136848e+01 4.5600000000000001e+01 5.1099859770630950e-04 4
P 2 1 -11 1.3608988909162606e-03 -7.0797770900342773e-04 -4.5535420867045751e+01 4.5535402652364432e+01 -4.0757567471711616e-02 2
P 3 1 22 -1.3608988909162606e-03 7.0797770900342773e-04 -6.4579130091094755e-02 6.4597347635566904e-02 -1.6130980174698654e-09 1
P 4 0 11 0.0000000000000000e+00 0.0000000000000000e+00 4.5599999997136848e+01 4.5600000000000001e+01 5.1099859770630950e-04 4
P 5 4 11 -6.9206286709266992e-06 1.4913930365122828e-04 4.5598536086585199e+01 4.5598528495827317e+01 -2.6311159737751326e-02 2
P 6 4 22 6.9206286709266992e-06 -1.4913930365122828e-04 1.4639105516485410e-03 1.4715041726827383e-03 2.0579515874459978e-11 1
V -3 0 [2,5]
P 7 -3 23 1.3539782622453340e-03 -5.5883840535219948e-04 6.3115219539447764e-02 9.1133931148191749e+01 9.1133909281051146e+01 2
P 8 7 -15 3.9415751172627040e+01 2.1813196014962450e+01 6.5533728999791174e+00 4.5585978851090765e+01 2.3911943786087866e+00 2
P 9 8 -15 3.9337461622363861e+01 2.1673662453262313e+01 6.5670154262523361e+00 4.5425401807139110e+01 1.7770499999996121e+00 2
P 10 8 22 7.8289550263179436e-02 1.3953356170013725e-01 -1.3642526273218885e-02 1.6057704395165695e-01 -2.6341780319308772e-09 1
P 11 7 15 -3.9414397194364788e+01 -2.1813754853367801e+01 -6.4902576804396714e+00 4.5547952297100949e+01 1.7770499999997402e+00 2
P 12 11 16 -2.1019369125366211e+01 -1.1058233261108398e+01 -3.3810205459594727e+00 2.3990200042724609e+01 0.0000000000000000e+00 1
P 13 11 13 -1.0991277694702148e+00 -4.3037441372871399e-01 -7.9439476132392883e-02 1.1877619028091431e+00 1.0565830000000000e-01 1
P 14 11 -14 -1.7295900344848633e+01 -1.0325146675109863e+01 -3.0297973155975342e+00 2.0369989395141602e+01 0.0000000000000000e+00 1
P 15 9 -16 3.7669422626495361e+00 2.1739947795867920e+00 1.1482763290405273e+00 4.4982938766479492e+00 0.0000000000000000e+00 1
P 16 9 -13 2.2649795532226562e+01 1.2544136047363281e+01 3.6078701019287109e+00 2.6141853332519531e+01 1.0565830000000000e-01 1
P 17 9 14 1.2920722961425781e+01 6.9555315971374512e+00 1.8108688592910767e+00 1.4785254478454590e+01 0.0000000000000000e+00 1
...
The detailed description of the ASCII HepMC output can be found in Section 3.4 of HepMC3 writeup.
The first two line indicate the version of HepMC (here 3.02.04) and the type of output, i.e. Asciiv3 (HepMC supports also binary formats as output).
The block for each event starts with a line E, indicating the event number, the number of vertices and the number of particles. The line staring with U gives the adopted units for energy and distances. The lines starting with P are the particle lines: the first integer is the particle number in the list, the second the particle number of the parent particle, the third the PDG particle ID, then we have the 3-momentum, the nergy and the mass; finally the status, with status==1 labelling stable particles entering leaving the interaction point and entering the detector. The lines starting with A indicate additional attributes: the can be per run, per event or per element of the listing. In this case they are used to provide helicity information for the two taus: the first number is the particle number, the second the name of the attribute, the rest the helicity information.
Q: What can be conidered strange in the above listing ?
Suggested answer
A close-up look at the listing rasing two questions
1. The number of the second event is still 0. This is due to a bug in the HepMC interface of KKMCee; it has no influence
in the following processing, since not really used.
2. The number of vertices does not seem to correspond to what found in the listing. The number of vertices, for example 4 in the first listing, correponds to the collision plus the decays one: the collision one is indicated by V, the other 3 are not indicated explicitely, but can be infered by looking at the particles having the same non-null parent ID: the decays of the Z boson (PDG id = 23), of Tau- (
The remaining output files from the run are found in the KKMCee-<date>-<time> directory. In particular the file pro.output contains at the end information about the process cross-section.
In this example
$ tail -37 KKMCee-<date>-<time>/pro.output
$ tail -37 kk/KKMCee-24Apr2023-060444/pro.output
*****************************
**** KKMCee Finalize ****
*****************************
********************************************************************************
* *
* **************************************** *
* ****** KKMCee::Finalize ****** *
* **************************************** *
* f_NevGen = 10000 = No. of generated events *
* XsPrimPb = 2700.8551 = Primary from Foam [pb] *
* FoamInteg = 1714.1189 = Crude from FOAM [pb] *
* +- = 0.0015340174 = error *
* **************************************** *
* <WtMain> = 0.54999872 = average WtMain *
* +- = 0.0014270066 = error abs. *
* XsMain = 1485.4669 = Xsection main [pb] *
* +- = 0.0070075399 = error absolute *
* +- = 0.0025945634 = error relative *
* ********** More from WtMainMonit ******* *
* AveWt = 0.54999872 = average <WtMain> *
* ERela = 0.0025945634 = relative error *
* sigma = 0.38656078 = dispersion of WtMain *
* DB_WTmax = 4 = input WTmax *
* WtMax = 5.6197178 = maximum WTmain *
* WtMin = 0 = mainimum WTmain *
* AvUnd = 0 = underflow *
* AvOve = 3.8040121e-05 = overflow *
* AvOve/<Wt> = 6.9164016e-05 = relative: AvOve/AveWt *
* Ntot = 73381 = Ntot primary events *
* Nacc = 10000 = accepted events *
* Nacc/Ntot = 0.13627506 = acceptance rate *
* Nneg = 0 = WT<0 events *
* Nove = 2 = WT>WTmax events *
* Nove/Ntot = 2.7255012e-05 = Nove/Ntot *
* Nzer = 1209 = WT=0 events *
* *
********************************************************************************
i.e the total ditau cross-section at 91.2 GeV from KKMCee is 1485.5 +- 0.007 pb .
2.1.4.3.2. HepMC to EDM4hep conversion
In order to get the events in EDM4hep format, we will use Gaudi and the tools available in k4FWCore and k4Gen. We need a Gaudi steering file that reads the HepMC file and writes out the EDM4hep file.
A minimal version of such a steering code is available on the tutorial reference page:
wget http://fccsw.web.cern.ch/tutorials/apr2023/tutorial1/hepmc2edm.py
Let’s see what it does: that is shown by the first line of the help function
$ k4run hepmc2edm.py -h
--> GenAlg --> HepMCToEDMConverter --> out
...
2.1.4.3.2.1. Dissection of hepmc2edm.py
Expand
The tool that we need is HepMCFileReader, which is a GaudiTool, not a GaudiAlgorithm, which is used as a signal provider (such as a Monte Carlo generator) within the Generator Algorithm (GenAlg). This is done in this part of the code:
from Configurables import HepMCFileReader
hepmcreader = HepMCFileReader()
from Configurables import GenAlg
reader = GenAlg()
reader.SignalProvider = hepmcreader
reader.hepmc.Path = "hepmc"
ApplicationMgr().TopAlg += [reader]
Then we convert the event from HepMC to EDM4hep with the HepMCToEDMConverter:
from Configurables import HepMCToEDMConverter
hepmc_converter = HepMCToEDMConverter()
hepmc_converter.hepmc.Path="hepmc"
hepmc_converter.GenParticles.Path = "GenParticles"
ApplicationMgr().TopAlg += [hepmc_converter]
Finally we write out the converted events into a file with the PodioOutput algorithm:
from Configurables import PodioOutput
out = PodioOutput("out", filename = "hepmc2edm_output.root")
out.outputCommands = ["keep *"]
ApplicationMgr().TopAlg += [out]
2.1.4.3.2.2. Running hepmc2edm.py
Among the hepmc2edm switches relevant for the purpose are those controling input an output files:
$ k4run hepmc2edm.py -h
...
--GenAlg.HepMCFileReader.Filename [GENALG.HEPMCFILEREADER.FILENAME], --Filename.GenAlg.HepMCFileReader [GENALG.HEPMCFILEREADER.FILENAME]
Name of the HepMC file to read [HepMCFileReader]
...
--out.filename [OUT.FILENAME], --filename.out [OUT.FILENAME]
Name of the file to create [PodioOutput]
...
We would like the output file to be called kk_Ztautau_mumu_10000.e4h.root . Which command should we use for that?
Check answer
k4run config/hepmc2edm.py -n 10000 --GenAlg.HepMCFileReader.Filename kk/kk_tautau_10000.hepmc --out.filename gen/kk_tautau_ecm91/events_1.root
Q: Can you explain why we need to pass the -n 10000 switch and how you could modify hepmc2edm.py to avoid that?
Check answer
Because hepmc2edm.py contains this piece of code:
from Configurables import ApplicationMgr
ApplicationMgr(
EvtSel='NONE',
EvtMax=1,
OutputLevel=INFO,
The setting EvtMax=1 is overwritten by -n <n_evts>. To avoid this one could set EvtMax=10000 inside hepmc2edm.py (try!)
Note en passant that the EDM4hep file is much smaller than the HepMC one:
$ ls -lt
total 43032
-rw-r--r-- 1 ganis vboxsf 3661630 Oct 18 2022 kk_tautau_10000.e4h.root
-rw-r--r-- 1 ganis vboxsf 1232 Oct 18 2022 hepmc2edm.py
drwxr-xr-x 1 ganis vboxsf 288 Oct 18 16:12 KKMCee-18Oct2022-161012
-rw-r--r-- 1 ganis vboxsf 19584017 Oct 18 16:12 kk_tautau_10000.hepmc
Q: Can you explain why?
Check answer
Because kk_tautau_10000.e4h.root is a ROOT file, which binary and compressed.
Q: How the cross-sections compare?
Answer
The differences of the cross-section calculated by KKMCee and Pythia8 is (1485.5 - 1467.0) pb = 18.5 pb ; the errors have a statistical and systematic component. Assuming half and half for statistical and systematics, and the systematics fully correlated, the error on the difference is about 8.5 pb, i.e. the two calculatons differ by 2.6 standard deviations. What would you check first?
2.1.4.4. Looking at the produced files. Comparing distributions
The idea here is to look at some distributions, typically key for generators (angles, momenta). We take as example: acollinearity (of the initial taus, of the decaying products), momenta and cosinus of polar angles of the final 1-prompt products.
2.1.4.4.1. Looking the MCParticle class
Despite being ROOT files and the information stored in POD (Plain Old Data), the EDM4hep files are not easily usable, because interpreting the PODs requires the higher level PODIO / EDM4hep classes.
This is what the helper functions available in FCCAnalyses, which depend of EDM4hep, do. They can be used to create flat ntuples, to be used for the analysis later on.
2.1.4.4.2. Building FCCAnalyses
FCCAnalyses is avaibale at https://github.com/HEP-FCC/FCCAnalyses. FCCAnalysis, which is based on ROOT DataFrame, changes regularly, almost daily.
Therefore it is always good to rebuild the latest version. It is advised to do it in a separate directory,
for example ../FCCAnalyses.
$ cd ..
$ git clone --branch pre-edm4hep1 https://github.com/HEP-FCC/FCCAnalyses.git
$ cd FCCAnalyses; mkdir {build,install}; cd build
$ cmake -DCMAKE_INSTALL_PREFIX=../install ..
$ make -j4 install
$ cd ..
$ source setup.sh
$ cd ../tutorials1
It is mandatory to run setup after the build in the source directory.
Now we are ready to go.
2.1.4.4.3. Creating histograms with FCCAnalyses
At this purpose we will use the recently introduced build_graph attribute. The example is availble at
histmaker_ttmm.py.
2.1.4.4.3.1. Dissection of histmaker_ttmm.py
Expand
The files need to be organised in a special way: directories need to be called as the process, files below need to be called events_<num>, when <num> is any number. So in the current case we have
$ ls -lt gen
total 0
drwxr-xr-x. 2 ganis sf 26 Apr 24 07:38 wz_tautau_ecm91
drwxr-xr-x. 2 ganis sf 26 Apr 24 07:37 p8_tautau_ecm91
drwxr-xr-x. 2 ganis sf 26 Apr 24 07:37 kk_tautau_ecm91
translating in the following processList:
# list of processes (mandatory)
processList = {
'p8_tautau_ecm91': {'fraction':1},
'wz_tautau_ecm91': {'fraction':1},
'kk_tautau_ecm91': {'fraction':1},
}
Then we need to define where the files are and where they will to go:
# Define the input dir (optional)
inputDir = "gen/"
#Optional: output directory, default is local running directory
outputDir = "outputs"
Define some binning for histograms:
# define some binning for various histograms
bins_p_l = (100, 0, 50) # 0.5 GeV bins
bins_cosTheta = (50, -1, 1)
bins_acol = (50, -1, -.9)
Now we come to the build_graph: here the input is the RDataFrame called df and the output a list of histograms called results.
We can use the built-in functions to extract the information, or define our own as in here
import ROOT
ROOT.gInterpreter.Declare("""
#ifndef funDone
#define funDone
float cosTheta(const edm4hep::Vector3f& in){
return (in.z/sqrt(pow(in.x,2)+pow(in.y,2)+pow(in.z,2)));
};
float scalarProductNorm(const edm4hep::Vector3f& in1, const edm4hep::Vector3f& in2 ){
return ((in1.x*in2.x + in1.y*in2.y + in1.z*in2.z)/sqrt(pow(in1.x,2)+pow(in1.y,2)+pow(in1.z,2))/sqrt(pow(in2.x,2)+pow(in2.y,2)+pow(in2.z,2) ));
};
float momP(const edm4hep::Vector3f& in ){
return (sqrt(pow(in.x,2)+pow(in.y,2)+pow(in.z,2)));
};
#endif
""")
which will need for the acollinearity and 1-prompt momentum and cos(theta). The histograms are defined in here
# baseline histograms, before any selection cuts (store with _cut0)
results.append(df.Histo1D(("P_mup", "", *bins_p_l), "muplus_p"))
results.append(df.Histo1D(("P_mum", "", *bins_p_l), "muminus_p"))
results.append(df.Histo1D(("CosTheta_taup", "", *bins_cosTheta), "cthetaup"))
results.append(df.Histo1D(("CosTheta_mup", "", *bins_cosTheta), "cthemup"))
results.append(df.Histo1D(("AcolTau", "", *bins_acol), "acoltau"))
results.append(df.Histo1D(("AcolMu", "", *bins_acol), "acolmu"))
2.1.4.4.3.2. Running histmaker_ttmm.py
The build_graph is part of the fccanalyses run:
$ fccanalysis run histmaker_ttmm.py
This should produce ROTO files with the histograms in ./outputs:
$ ls -lt outputs/
total 24
-rw-r--r--. 1 ganis sf 7386 Apr 24 18:01 kk_tautau_ecm91.root
-rw-r--r--. 1 ganis sf 7384 Apr 24 18:01 wz_tautau_ecm91.root
-rw-r--r--. 1 ganis sf 7399 Apr 24 18:01 p8_tautau_ecm91.root
2.1.4.4.4. Comparing distributions
FCCAnalyses provides the plots option to prepare some plots. A possible way to plot the histos is available at
plots_ttmm.py, which can run as
$ fccanalysis plots plots_ttmm.py
with results available under plots.
Example of a result are: positive muon momentum, positive muon cosine theta, acollinearity of muons.
2.1.4.4.5. Possible conclusion of the exercise
Think of your own. Expand for a possible one.
Hint
The distributions show a lot of similarities, which means that for detector optimisation studies the choice of the generator probably won’t matter. However, the total cross-section is significantly different, so for studies where exact calculations matter more, the KKMCee seems the choice to go, because it is the only one giving the total cross-section compatible with experiment (ALEPH at 91.197 GeV gave 1.4771 ± 0.0066± 0.0027 pb).